Skip to product information
1 of 12

Access Reader G2 — UniFi Door Access

Access Reader G2 — UniFi Door Access

Regular price $244.00
Regular price $325.00 Sale price $244.00
25% Off | Save $81.00 Sold out
Taxes included. Shipping calculated at checkout.



In stock

View full details

Introducing the compact and advanced Ubiquiti G2 Reader – a second-generation NFC card reader and request-to-exit device, now featuring innovative hand-wave door unlocking technology.

  • Effortlessly unlock doors using an NFC card or the UniFi Identity mobile app, designed for convenience.
  • Enhanced with additional handwave unlock functionality, offering touchless access control.
  • Personalised entry and exit greeting messages for a welcoming experience.
  • Seamlessly connects to the UniFi Access Hub utilising Power over Ethernet (PoE) for efficient installation.
  • Built to withstand diverse Australian climates with IP55 weather resistance, functioning optimally from -30 to 45° C.
Dimensions 93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight 82 g (2.9 oz)
Enclosure material Polycarbonate, glass
Mounting In wall, gang box
Weatherproofing IP55
Networking interface (1) 10/100 MbE RJ45 port
Connectivity BLE 4.1
Power method PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range 48V DC
Max. power consumption 5W
ESD/EMP protection Air: ±15kV, contact: ±8kV
Sensors Proximity sensor
Speaker (1) 8 ohm, 0.7W
Button (1) Factory-reset
NFC frequency 13.56 MHz
NFC read range < 30 mm
NFC standards ISO 14443A, 14443B, 15693
NFC technology NFC Tag 1,2,3,4,5
MIFARE Classic
MIFARE Ultralight
Operating environment Outdoor use
Operating temperature -30 to 45° C (-22 to 113° F)
Operating humidity 5 to 90% noncondensing
Software information The software version of a product can be checked at
UL 294 level Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm2) for patch cords; 24 AWG (0.21 mm2) for horizontal or riser cable.
CAN/ULC-60839-11-1 Grade Grade assignment: I
Certifications CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level UA-G2/UA-G2-Black, V02
System Steady blue: Adopted/device is ready
Steady white: Pending adoption
Blinking white/blue: Upgrading firmware
Strobing red: Emergency lockdown
Management application UniFi Access: Version 1.5.9 and later

Customer Satisfaction

Check out some recent reviews and customer experiences shared on Trustpilot

Enquire about this product including its specification, customisation options and stock availability