Collection: UniFi Enterprise Switches

Enterprise network switches built for uptime

Ubiquiti’s UniFi Enterprise switches are designed for networks that can’t afford to go down: multi-building campuses, schools and universities, hospitals, hotels, stadiums and busy corporate offices. The range covers every tier of a modern network, from Layer 3 PoE+++ access switches at the edge to 25G/100G aggregation and a 3.2 Tbps core, plus purpose-built switches for professional audio and video. Every model is managed in UniFi Network, giving you enterprise-class resilience without enterprise-class complexity.

Redundancy at every layer

Resilience is built into the hardware rather than bolted on. Across the range, dual hot-swappable power supplies and hot-swappable fan modules let you replace a failed part without powering the switch down.

The Enterprise Campus Stackable models (24S and 48S, with or without PoE) go further. Dedicated 100G QSFP28 stacking ports link switches in a ring, so the stack works as one large switch and shows up as a single device in UniFi Network. Split an uplink or server link across two stack members and it carries on even if one switch fails outright.

At the aggregation and core layers, Multi-Chassis Link Aggregation (MC-LAG) pairs two Enterprise Campus Aggregation or Core switches so downstream switches can connect to both at once. Traffic is shared while both are healthy and continues over the surviving switch if one goes offline.

Multi-gig PoE+++ access with 25G and 100G uplinks

Enterprise Campus PoE switches combine 2.5 GbE and 10 GbE RJ45 ports, every one delivering PoE+++ (IEEE 802.3bt) at up to 90W. That’s ample headroom for Wi-Fi 7 access points, PTZ cameras, digital signage and AV endpoints, with 25G SFP28 uplinks to carry the traffic upstream.

Upstream, Enterprise Campus Aggregation packs 48 × 25G SFP28 and 6 × 100G QSFP28 ports into a single rack unit, with 1.8 Tbps of non-blocking throughput. For the largest backbones, Enterprise Campus Switch Core delivers 32 × 100G QSFP28 ports and 3.2 Tbps. Because the SFP28 ports also run at 10G and the QSFP28 ports at 40G, you can bring existing 10G and 40G links across and upgrade in stages.

Pro AV switching with PTP, SMPTE ST 2110 and AES67

The Enterprise Audio/Video switches are engineered for AV-over-IP, where every device must share a precise clock. They support SMPTE ST 2110, AES67 and SDVoE, with IEEE 1588v2 Precision Time Protocol (PTP) hardware timestamping on every Ethernet and QSFP28 port. Each switch can act as a PTP grandmaster, boundary clock or transparent clock, while a high-precision oven-controlled (OCXO) clock and an optional GNSS antenna input for GPS-referenced timing keep audio and video locked in sync.

Choose the Enterprise Audio/Video XG 24 PoE for 24 × 10G PoE+++ copper ports and four 100G uplinks, or the Enterprise Audio/Video Fiber for 20 × 10G SFP+ ports and two 100G uplinks. Selected Enterprise Campus models also offer built-in Pro AV profiles for platforms such as Dante, Q-SYS, NDI, Shure and Crestron, making meeting rooms and smaller AV systems quick to configure.

Simple to manage, with no licence fees

Every switch is adopted and managed in the UniFi Network application alongside your UniFi gateways and access points, with no per-device licences or subscriptions. Layer 3 features including inter-VLAN routing, static routes, DHCP server and DHCP relay take routing load off the gateway, while access-layer protections such as 802.1X, ACLs and DHCP snooping help secure the edge. Colour-coded Etherlighting™ shows each port’s network at a glance, so tracing a patch lead or spotting a port on the wrong VLAN is quick work.

Which UniFi Enterprise switch do you need?

• Enterprise Campus 24 PoE and 48 PoE: standalone Layer 3 access switches with multi-gig PoE+++ and 25G SFP28 uplinks.
• Enterprise Campus 24S and 48S (PoE or non-PoE): stackable access switches that add 100G stacking for single-device management and switch-level failover.
• Enterprise Campus Aggregation: 48 × 25G and 6 × 100G with MC-LAG, and Ubiquiti’s recommended partner for Enterprise Campus access switches. It can also serve as the core on smaller sites.
• Enterprise Campus Switch Core: 32 × 100G and 3.2 Tbps with MC-LAG for the backbone of large, multi-building networks.
• Enterprise Audio/Video XG 24 PoE and Fiber: PTP-timed switching for broadcast, live production and AV-over-IP.

All Enterprise switches are 1U, full-depth units. Plan for a four-post rack, or use a centre-mount bracket or cantilever shelf on two-post racks. Browse the collection below to build a network that’s fast, resilient and simple to run.