Set up and use a UniFi Dream Router 7 or 5G Max

The Dream Router 7 and Dream Router 5G Max put a gateway, WiFi 7 and a small switch into one desktop unit, and both can run the full set of UniFi apps. [1] [2] The 5G Max adds a built-in 5G modem. This guide covers setup and placement for both models, then the PoE port, the microSD card, WiFi Uplink, and getting 5G working on an Australian plan.

Outcome and equipment

By the end, your Dream Router will be online and well placed for WiFi, with a backup connection ready if you choose to add one.

Know your model

  Dream Router 7 [1] Dream Router 5G Max [2]
Default WAN 10G SFP+ and 2.5G RJ45 10G SFP+ and 2.5G RJ45, plus 5G
LAN ports 3 × 2.5G, one with PoE 3 × 2.5G, one with PoE
WiFi WiFi 7 on 2.4, 5 and 6 GHz WiFi 7 on 2.4, 5 and 6 GHz
Coverage 160 m² 160 m²
Rated IPS 2.3 Gbps 2.3 Gbps
Rated for 30+ devices, 300+ users 30+ devices, 300+ users
Cameras 5 HD, 2 2K or 1 4K 5 HD, 2 2K or 1 4K
Storage 64 GB microSD included 64 GB microSD included
Display 0.96" status display 4.7" touchscreen
Working temperature −10 to 40 °C 0 to 40 °C

Choose a spot

A Dream Router is also your main access point, so where you put it decides your WiFi coverage. Treat 160 m² as an open-plan best case: double-brick walls, slab floors and foil insulation all cut it down.

  • Put it in a central spot on a shelf or bench, not in a cupboard, on the floor or behind a TV.
  • If your nbn box is in a garage or at one end of the house, run a cable to a better spot instead of leaving the router beside it.
  • On a 5G Max, put coverage first if you use the nbn, and move closer to a window if 5G is your main connection. Test both before you settle.
  • Add a wired access point if you can't reach the far end of the home. Choose UniFi access point locations shows how to test.

First-time setup

  1. Connect it. Plug the nbn box or modem into the 2.5G WAN port, or use the SFP+ port with a module if you need to. [1] FTTN and FTTB services need a VDSL2 modem in front of the router. [3] [4] Connect power.
  2. Set it up. In the UniFi app, follow the setup wizard, and stay within 3 m if you're connecting over Bluetooth. [5] Or connect to its WiFi or a LAN port and browse to unifi/. [5]
  3. Name your WiFi. If you're replacing an old router, give the new WiFi network the same name and password as the old one, so your devices reconnect by themselves.
  4. Enter any ISP details. If your ISP uses PPPoE, enter it at Settings › Internet. [6]
  5. Update. Go to Settings › Control Plane › Updates. [7]
  6. Turn on backups. Tick System Backups at Settings › Control Plane › Backups. [8]
  7. Tune the WiFi. The WiFi settings guide covers the settings worth changing.

Add more WiFi

If one router can't cover your home, add an access point rather than moving things around for weeks.

  1. Use a cable if you can. A wired access point gives you the best result. Connect it to a 2.5G LAN port, and power it from an injector or PoE switch if it needs more than the router's PoE port can supply. [1]
  2. Use mesh if you can't. Compare UniFi mesh and wired access points shows how to measure the difference.
  3. Adopt it. It appears under Devices in UniFi Network. Click Adopt, and it picks up your WiFi networks.
  4. Test before you mount it. Choose UniFi access point locations shows how. If phones then cling to a distant access point, see Troubleshoot UniFi client roaming.

Use the PoE port

Each model has one PoE port, with up to 15.4W. [1] [2] That's standard PoE rather than PoE+, so save it for a low-power device. [2] Check the device's power needs first. Many newer access points need more than 15.4W for full performance, so you may need an injector or a PoE switch for those. See Choose a UniFi PoE switch or injector.

Use the microSD card

Both models ship with a 64 GB microSD card for recording. [1] [2] Neither spec sheet gives a maximum.

  • Keep expectations small. Ubiquiti's limit is one 4K camera, two 2K or five HD. [1]
  • Check the recording modes on the 64 GB card. Ubiquiti doesn't say whether the included card supports continuous recording, so check the modes Protect offers on your unit before you rely on it.
  • Fit 128 GB or larger for continuous recording. That's the minimum Ubiquiti's storage page sets for the older Dream Router, and its own cards start there. [9] [10] At 4 Mbps, 128 GB holds about three days of footage from one camera.
  • Use an endurance card. Ubiquiti's own cards go up to 1 TB and are built for constant writing. [10] [11]

Run UniFi Protect and Access on a Cloud Gateway has more detail.

Add WiFi Uplink as a backup

WiFi Uplink, also called WiFi WAN, lets the router use another WiFi network as its internet connection, including a phone's hotspot. [12] [13] Ubiquiti lists it for the Dream Router 7, Dream Router 5G Max, Express 7 and Cloud Gateway Industrial, and it needs Network 11 and UniFi OS 6.0.10 or newer. [13]

  1. Open the web interface. Sign in to UniFi Network in a browser on your computer.
  2. Create a WAN. Your WAN connections are at Settings › Internet. [6] Create a new one there and choose WiFi Uplink. This step isn't in Ubiquiti's documentation, so the wording may differ on your version.
  3. Choose the network. Select the WiFi network you want to use, and enter its password.
  4. Check its role. Ubiquiti describes WiFi WAN as a primary or backup connection. [12] If you already have a main WAN, set WiFi Uplink as a failover link, so it's only used when the main one fails. [6]
  5. Test it. Unplug your main WAN and confirm you're online. A phone may turn its hotspot off when nothing is connected, so check that it stays available.

Set up 5G on the 5G Max

Choose a plan

This is where most people get caught out. Home-internet SIMs from Telstra, Optus and Vodafone are tied to the modem they supply, so they're not a safe choice for this router. [14] [15] [16] Look for a data plan that allows your own device. Vodafone's SIM Only Modem plans do; ask Telstra or Optus what they offer. [17]

The spec sheet lists certification with AT&T and T-Mobile in the US, but no Australian carrier, so ask yours before you buy. [2]

Check the bands

The 5G Max has a wide band list, and it covers the main Australian bands. Its 5G bands are all sub-6 GHz, so it doesn't support mmWave. [2]

Carrier Published bands Note
Telstra LTE B28, B3, B1, B7 and B26, and 5G n78, n7 and n26 [18] Its n258 mmWave isn't supported on this router
Optus LTE on 700 MHz (B28), and 5G on 900 MHz, among others [19] [20] A partial list from Optus's own pages, so check coverage at your address
Vodafone LTE on 700, 850, 1800 and 2100 MHz, and 5G on 700, 850 and 2600 MHz, among others [21] Vodafone's own page doesn't list 3500 MHz

Check your carrier's coverage map for your exact address, and test with a phone on that network at the spot where the router will sit.

Fit a SIM or add an eSIM

  1. Nano-SIM: the router has two SIM slots that take nano-SIMs. [2] [22] A second SIM can give you a backup carrier.
  2. eSIM: one of the two SIMs can be an eSIM instead, so you can run two nano-SIMs, or one nano-SIM and an eSIM. [2] [22]
  3. APN: if the connection doesn't come up, ask your carrier for its APN, then check it in the 5G connection's settings in UniFi Network. Ubiquiti doesn't document this setting for the 5G Max, so try the web interface if the app doesn't show it.

Choose how 5G is used

Ubiquiti says 5G can be your primary link, a failover link or part of load balancing, and you can set a usage limit for each SIM. [22] On a capped plan, set it as failover and add a limit so a long outage doesn't bring a bill shock. Check which role each SIM is set to before you rely on it.

Mobile services often don't give you a public IP address, and port forwarding needs one, so port forwards may not work over 5G. [23] [24] Use Teleport for remote access instead, because it works when the gateway is behind NAT. [25] 5G home internet and Backup internet for Australia compare the options.

Verification

  • A wired speed test on a 2.5G port is close to your plan speed.
  • Walk the home with a phone on WiFi, and test the far rooms, not just the room with the router.
  • Your PoE device stays up under normal use.
  • If you use a camera, Protect records and plays back a test clip.
  • If you've set up WiFi Uplink or 5G, unplug the main WAN and confirm the internet returns, then plug it back in and confirm it moves back.
  • On a 5G Max, check that data use is showing, and that any limit is set.
  • Restart the router, and confirm the internet and WiFi return by themselves.

Troubleshooting and recovery

Problem Likely cause What to do
WiFi is weak in some rooms Placement or building materials Move the router, or add a wired access point. Diagnose slow UniFi WiFi shows how to test.
A PoE device won't start It needs more than 15.4W [1] Use an injector or a PoE switch.
WiFi Uplink isn't offered The router is on an older version [13] Check for Network 11 and UniFi OS 6.0.10 or newer, and try the web interface.
WiFi Uplink drops after a while The phone's hotspot has gone to sleep Keep a device connected to it, or use a fixed hotspot.
5G won't connect A locked home-internet SIM, a wrong APN or a poor signal [14] Test the SIM in a phone, confirm that the plan allows your device, and check the APN.
5G is slow Tower load, or the router's position Move it towards a window, and compare different times of day.
Port forward fails over 5G No public IP address, for example behind CGNAT [23] Use Teleport instead.
Recordings stop The card is full, worn or failing Replace it with an endurance card of 128 GB or larger.

If the router won't respond at all, see Update, recover and replace a UniFi Cloud Gateway.

Sources:

Back to the series

Leave a comment

Please note, comments need to be approved before they are published.