UniFi Remote Control KeyFob
SKU:USL-FOB
Sale Live Now. Limited promotional stock available — don’t miss out!
Out of stock
Couldn't load pickup availability
Australian Reseller | Australian Stock | Australian Warranty
Found it cheaper elsewhere? Let us know
Buying for your business? Earn Store Credits

Arm. Disarm. Panic. All From Your Keyring.
SuperLink key fob for instant programmable actions across your UniFi deployment, with up to 10 years of battery life.
Note. SuperLink Gateway and Protect 7.1 required.
View Installation Guide| Overview | |
| Dimensions | 67 x 35 x 18.5 mm (2.6 x 1.4 x 0.7") |
| UniFi Application Suite | Protect |
| Performance | |
| Connectivity | SuperLink (Proprietary) |
| Operating Frequency | |
| US | 915.6–927.6 MHz |
| EU | 865.1–869.5 MHz |
| Antenna Gain | |
| SuperLink | -5 dBi |
| Max. TX Power | |
| SuperLink | 14 dBm |
| Max. Range | |
| SuperLink | 2 km (1.2 mi) |
| Hardware | |
| Max. Power Consumption | 150 mW |
| Supported Voltage Range | 3V |
| Power Method | (1) Lithium battery Size: CR2450 Capacity: 600 mAh Max. pulse current: 50mA |
| Battery Life | Up to 10 years |
| Weight | 32 g (1.1 oz) |
| Enclosure Material | Polycarbonate |
| Buttons | (4) Top buttons: Primary faceplate: Arm, Disarm, Night mode, Panic Secondary faceplate: Numeric (1, 2, 3, 4) for programmable functions (2) Side buttons for programmable functions |
| LEDs | (1) Status: R/B/W, (1) Signal: B/R |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| Certifications | CE, FCC, IC, UL 4200A |
| NDAA Compliant | ✓ |
| Software | |
| Application Requirements | |
| Web Application | UniFi Protect |
| Mobile App | UniFi Protect iOS™ and Android™ |
Visit Ubiquiti for more information.

Customer Satisfaction
Check out some recent reviews and customer experiences shared on Trustpilot
The Ubiquiti USL-FOB is a pocket-sized SuperLink key fob that puts your entire UniFi security system on a keyring. Arm, disarm, switch to night mode or trigger a panic alert instantly — no phone, no app, no keypad. With up to 2 km of SuperLink range and a battery rated for up to 10 years, it's built to be carried and forgotten about until the moment you need it.
Key features
- One-touch security control — dedicated Arm, Disarm, Night Mode and Panic buttons on the primary faceplate.
- Six programmable inputs — four top buttons plus two side buttons, each mappable to custom UniFi Protect actions.
- Swappable numeric faceplate — a secondary 1–2–3–4 faceplate lets you assign the fob to non-alarm automations.
- Up to 2 km SuperLink range — long-range proprietary wireless that reaches across large sites, not just single rooms.
- Up to 10 years of battery life — a single CR2450 lithium cell, no charging cradle, no weekly top-ups.
- Dual-LED feedback — separate status and signal LEDs confirm the command landed.
- NDAA compliant — approved for US federally funded projects.
- UL 4200A certified — meets the button-battery safety standard, an important consideration in homes and schools.
- 32 g and 67 mm long — genuinely keyring-sized at 2.6 x 1.4 x 0.7".
Instant control without reaching for your phone
App-based security is excellent right up until you're carrying groceries, wearing gloves, or walking a dark car park. The USL-FOB solves the last three metres of the problem. Four clearly-marked buttons sit under your thumb: Arm when you leave, Disarm when you return, Night Mode when the household turns in, and a dedicated Panic button that fires an alert across your UniFi Protect deployment immediately.
Two status LEDs confirm what happened. The status LED (red/blue/white) reports the action, while the signal LED (blue/red) tells you whether the fob reached the gateway — so you're never left guessing whether the system actually armed as you walk away.
SuperLink range that covers the whole property
The USL-FOB communicates over SuperLink, Ubiquiti's proprietary long-range protocol, rather than Bluetooth or Wi-Fi. That's the difference between a fob that works near the front door and one that works from the far end of a warehouse, a back paddock, or a multi-building campus.
Line-of-sight range reaches up to 2 km (1.2 mi) with 14 dBm maximum transmit power. In practical terms: you can arm the building from your car before you've left the site, or trigger a panic alert from a loading dock the far side of the property.
Region: US | Operating frequency: 915.6–927.6 MHz
A decade of battery life, then a coin cell
The fob runs on a single CR2450 lithium coin cell (600 mAh, 3V) rated for up to 10 years of service. Maximum draw is 150 mW with a 50 mA pulse ceiling, so the fob spends almost all of its life asleep.
Because coin cells carry a genuine ingestion risk for small children, Ubiquiti has certified the USL-FOB to UL 4200A — the safety standard covering battery-compartment security on consumer products. If this fob is going into a family home or a school, that certification matters.
Programmable beyond the alarm panel
The four top buttons and two side buttons can each be assigned to programmable actions in UniFi Protect. Swap the primary faceplate for the included numeric faceplate (1, 2, 3, 4) and the fob stops looking like an alarm remote entirely — useful when you want to hand a contractor a gate-and-lights fob without implying they can disarm the building.
Typical assignments:
- Open a specific gate or roller door
- Trigger a UniFi Protect siren or AI Speaker announcement
- Fire a Relay-driven output
- Run a scene across multiple UniFi devices
- Silent duress alert for retail and reception staff
Built for real deployments
The polycarbonate enclosure weighs 32 g and measures 67 x 35 x 18.5 mm — small enough that people will actually carry it. It's rated for 0 to 40° C and 10 to 90% non-condensing humidity, which suits indoor and sheltered outdoor use.
For installers, the appeal is fleet-level: cheap enough to issue one per staff member, long-lived enough that you're not scheduling battery-swap visits, and centrally managed from UniFi Protect alongside every sensor and camera on site.
Compatibility and requirements
Important: The USL-FOB is not a standalone device. It requires both of the following.
| Requirement | Detail |
|---|---|
| SuperLink Gateway | Required — the fob communicates via SuperLink only |
| UniFi Protect | Version 7.1 or later |
| Management | UniFi Protect web app, or the UniFi Protect app for iOS and Android |
Pairs naturally with the rest of the UniFi Sensors & Alarms range: Entry Sensor, Motion Sensor, Glass Break Sensor, Alarm Hub, Sirens, Relay and the AI Speaker.
Datasheet, Deployment & Features
Frequently Asked Questions
How long does the battery last on the Remote Control KeyFob?
Battery life depends on usage. At an average of 10 button presses per day, the Remote Control KeyFob can last up to 10 years. Actual battery life may be shorter in cold temperatures.
Can the faceplate be changed on the Remote Control KeyFob?
Yes. The Remote Control KeyFob includes two interchangeable faceplates: one pre-installed for alarm system control and a secondary faceplate for general-purpose use.
What button press events does the Remote Control KeyFob support?
The Remote Control KeyFob supports single press, double press, and long press (3s) events to help prevent accidental activation.
Can the battery be replaced when it runs out?
Yes. The Remote Control KeyFob uses a CR2450 battery. Replacement batteries should have a capacity of 600 mAh and a maximum pulse current of 50 mA.
Buying for your business? Get special pricing and bulk discounts! Enquire about this product including its specification, customisation options and stock availability.
- Choosing a selection results in a full page refresh.
- Opens in a new window.